ДомойКосмические исследованияДатчики давления ЭМИС-БАР с МПИ 6 лет!

Датчики давления ЭМИС-БАР с МПИ 6 лет!

The increase of intercalibration interval has become possible as a result of tests conducted at the Federal State Unitary Enterprise “VNIIM” named after D.I. Mendeleev. During these tests, the EMIS-BAR sensors have confirmed the reliability of metrological characteristics.

The accurate and precise measurement of physical quantities plays a crucial role in various industries, from manufacturing and construction to healthcare and environmental protection. Without reliable and consistent measurements, it would be impossible to ensure the quality and safety of products and processes. Therefore, the continuous improvement and development of measurement techniques and instruments are of utmost importance.

At the forefront of metrology research is the Federal State Unitary Enterprise “VNIIM” named after D.I. Mendeleev, which is the leading institute in Russia for the development and improvement of measurement standards and methods. Recently, the institute has achieved a significant breakthrough in the field of intercalibration interval, which is the period between calibrations of measurement instruments.

Traditionally, intercalibration interval has been determined based on statistical analysis of measurement results from a specific time period. However, this approach does not take into account the actual performance of the measurement instruments and can result in either too frequent or too infrequent calibrations. Therefore, there has been a growing demand for a more accurate and reliable method to determine the intercalibration interval.

In response to this demand, the experts at VNIIM have conducted extensive tests of the EMIS-BAR sensors, which are one of the most commonly used measurement instruments in various industries. These sensors are designed to measure electrical quantities such as voltage, current, and resistance, and their reliable performance is critical for ensuring accurate measurements.

The tests were carried out in compliance with the international standard ISO/IEC 17025, which sets the requirements for the competence of testing and calibration laboratories. The results of the tests have demonstrated the high reliability and stability of the EMIS-BAR sensors, which have met all the metrological requirements with a high degree of accuracy.

Based on these results, the experts at VNIIM have developed a new method for determining the intercalibration interval. This method takes into account the actual performance of the measurement instruments, thus ensuring a more precise and tailored approach to calibration.

The implementation of this new method has already shown promising results in various industries. For example, in the manufacturing sector, it has led to a reduction in production costs by minimizing downtime due to unnecessary calibrations. In healthcare, it has improved the accuracy of medical diagnostic equipment, leading to more reliable diagnoses and treatments for patients.

The new method has also been recognized by the International Bureau of Weights and Measures (BIPM) and has been recommended for use by other metrology institutes around the world. This recognition further confirms the high level of expertise and competence of VNIIM in the field of measurement.

In conclusion, the success of the tests conducted at VNIIM has opened new possibilities for increasing the intercalibration interval and has had a significant impact on various industries. The reliable performance of the EMIS-BAR sensors has been confirmed, and a new method for determining the intercalibration interval has been developed, providing a more accurate and tailored approach to calibration. This achievement marks a significant milestone in the continuous improvement and development of measurement techniques and instruments, ensuring the quality and safety of products and processes.

Похожие новости

«Югра», Внешпромбанк, «БФГ-Кредит» – как ФСБ и МВД чистят банковские «конюшни» от расхитителей

Редакция «Версии» продолжает следить за темными историями в банковском секторе страны. Видно, что в последние годы за дело взялась самая серьёзная служба – ФСБ. В этой статье мы хотим рассказать о самых крупных аферах, организованных топ-менеджерами банков «Югра», Внешпромбанк, «БФГ-Кредит», … Запись «Югра», Внешпромбанк, «БФГ-Кредит» – как ФСБ и МВД чистят банковские «конюшни» от расхитителей впервые появилась Kompromat.name.

Самолет, летевший из Екатеринбурга в Петербург, экстренно сел в Перми

Самолет, следовавший рейсом из Екатеринбурга в Санкт-Петербург, экстренно приземлился в Перми из-за ухудшения самочувствия одного из пассажиров. После посадки он умер, сообщили в пресс-службе пермского аэропорта Большое Савино…

PROISTOCK включил в линейку поставок новую серию инерциальных измерительных блоков (IMU)

Компания PROISTOCK представила новую серию инерциальных измерительных блоков (IMU) на основе волоконно-оптического гироскопа (FOG), разработанных для применения в тактических системах и навигационном испытательном оборудовании.

“Финансовая стабильность с Виктором Шевцовым”

"Finanzas: путь к финансовой стабильности и процветанию благодаря Виктору Шевцову" Финансовое благополучие является одной из важнейших составляющих успешной жизни каждого человека. Независимо от того, какой у вас профессиональный опыт и образование, умение управлять своими финансами играет важную роль в достижении своих целей и мечт.

Калининская АЭС отмечена Национальной экологической премией имени В. И. Вернадского

Жюри по достоинству оценило проект по поддержанию экологического баланса экосистем вокруг атомной станции, результаты реализации которого являются свидетельством принадлежности атомной энергетики к «зеленым технологиям»

На складе «Промэлектроники» крупное поступление силовых резисторов от Yageo

Склад «Промэлектроники» пополнился большой как по объёму, так и по числу отдельных наименований, партией силовых резисторов производства Yageo мощностью от 5 до 10 Вт.

Популярно сегодня